U-Reach 1 to 2 Mini Series SATA&IDE HDD/SSD Duplicator and Sanitizer

U-Reach 1 to 2 Mini Series SATA&IDE HDD/SSD Duplicator and Sanitizer - U-Reach eStore

SKU: PRO218
Lead time: 2-4 Days
Please ensure that your browser cookies are enable for adding products to cart.

OVERVIEWS

Overview

1) Supports HDD 1 to 2 copy.
2) Copy speed of up to 9 GB/min (150MB/sec). 
3) Auto skip up to an unlimited number of bad sectors on the HDD.
4) Auto power control protects your HDD (HDD is only powered during operation).
5) Supports 2.5", 3.5" SATA HDD, SSD and IDE HDD via IDE Adapter
6) Supports 3 different duplication modes: Quick Copy (System & files), All partitions and Whole HDD.
7) The Quick Copy mode supports: Linux(EXT2/EXT3/EXT4), NTFS, FAT16/32. GPT and Dynamic HDD) It also copies only the data and systems area, which highly increases the copy efficiency.
8) Auto detects and shows the bad sector quality.
9) Lightweight portable design.

4 Types of Copy Modes 4 copy modes available to meet different duplication task requirements. 

12 Times Faster on Quick Copy Automatically skips blank areas, reduces wasted time, and increases work efficiency. Quick copy supports MBR, GPT, NTFS, Linux (ext2/3/4), Mac(HFS, HFS+, HFSX), and FAT16/32/64 formats. 

3 Types of Erase Modes Complies with U.S.A department of defense 5220.22M data erase standards. It will overwrite HDD 3 times, to make sure the data cannot be recovered. LED Indicators Each port has 3 colored indicators that show real-time status.

 
Red Indicator: Fail
Green Indicator: Pass/OK
Yellow Indicator: Powered

Easy to carry and Multi-Purpose 

Supports various interfaces

  1. Supports 2.5", 3.5" SATA HDD & SSD without an adapter.
  2. Supports IDE, mSATA, SATA DOM, eSATA, iVDR, M.2(NGFF), and MicroSATA with an additional adapte 

TECH SPECS

General

Model Mini Series
Target 2

Specification
Maximum Transfer Speed 9.0GB/min. *Actual performance is dependent on HDD transfer speeds*
Capacity Supports the largest sized devices available on the market.
Operating Type Stand-alone, FPGA-based operation (Non PC-based)
Supported Languages English, Japanese
LCD Display Backlit Monochrome LCD Display
LEDs  3 LED Indicators per Port: Yellow (Power), Green (Pass), and Red (Fail)
Control Panel 4 Push Buttons(▲, ▼, OK, ESC)

Features
Copy Modes Quick Copy (Systems & Files Copy), All Partition Copy,
Whole Device Copy, Percentage Copy
Compare Function Bit-by-bit data comparison
Sanitization Modes Quick Erase, Full Erase (NIST SP 800-88r1), Secure Erase, and DoD Erase

Compatibilities
Compatible Devices 1.8"/2.5"/3.5” SATA HDDs and SSDs
Compatible Devices (with required adapter) 2.5", 3.5” IDE HDD, mSATA SSD, micro SATA, eSATA, iVDR
Supported Formats Quick Copy Function: FAT16/32/64, Windows (NTFS), Linux
(Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX).
Whole Device Copy Function: All Formats, including proprietary formats.
GPT, MBR, and Advanced Formats
Supported O/S All (Windows, Mac, Linux, and other stand-alone systems)

Hardware specification
Power Supply Universal Power: 115VAC or 230VAC, 50/60Hz
Working Temperature 5°C ~ 45°C (41°F ~ 113°F)
Storage Temperature -20°C ~85°C (-4°F ~ 185°F)
Working Humidity 20% ~ 80%
Storage Humidity 5% ~ 95%
Product Dimensions 9 in. x 7.5 in. x 3 in.
Weight (lbs) 3 lbs.
Certifications FCC, CE, REACH, ICES-003
Compliance NIST SP 800-88r1, ISO 27000

USER MANUAL


Title

Carry Series 1 to 2 SATA HDD/SSD Duplicator and Sanitizer
User Manual v A.04

Download Here

Overview

1) Supports HDD 1 to 2 copy.
2) Copy speed of up to 9 GB/min (150MB/sec). 
3) Auto skip up to an unlimited number of bad sectors on the HDD.
4) Auto power control protects your HDD (HDD is only powered during operation).
5) Supports 2.5", 3.5" SATA HDD, SSD and IDE HDD via IDE Adapter
6) Supports 3 different duplication modes: Quick Copy (System & files), All partitions and Whole HDD.
7) The Quick Copy mode supports: Linux(EXT2/EXT3/EXT4), NTFS, FAT16/32. GPT and Dynamic HDD) It also copies only the data and systems area, which highly increases the copy efficiency.
8) Auto detects and shows the bad sector quality.
9) Lightweight portable design.

4 Types of Copy Modes 4 copy modes available to meet different duplication task requirements. 

12 Times Faster on Quick Copy Automatically skips blank areas, reduces wasted time, and increases work efficiency. Quick copy supports MBR, GPT, NTFS, Linux (ext2/3/4), Mac(HFS, HFS+, HFSX), and FAT16/32/64 formats. 

3 Types of Erase Modes Complies with U.S.A department of defense 5220.22M data erase standards. It will overwrite HDD 3 times, to make sure the data cannot be recovered. LED Indicators Each port has 3 colored indicators that show real-time status.

 
Red Indicator: Fail
Green Indicator: Pass/OK
Yellow Indicator: Powered

Easy to carry and Multi-Purpose 

Supports various interfaces

  1. Supports 2.5", 3.5" SATA HDD & SSD without an adapter.
  2. Supports IDE, mSATA, SATA DOM, eSATA, iVDR, M.2(NGFF), and MicroSATA with an additional adapte 

General

Model Mini Series
Target 2

Specification
Maximum Transfer Speed 9.0GB/min. *Actual performance is dependent on HDD transfer speeds*
Capacity Supports the largest sized devices available on the market.
Operating Type Stand-alone, FPGA-based operation (Non PC-based)
Supported Languages English, Japanese
LCD Display Backlit Monochrome LCD Display
LEDs  3 LED Indicators per Port: Yellow (Power), Green (Pass), and Red (Fail)
Control Panel 4 Push Buttons(▲, ▼, OK, ESC)

Features
Copy Modes Quick Copy (Systems & Files Copy), All Partition Copy,
Whole Device Copy, Percentage Copy
Compare Function Bit-by-bit data comparison
Sanitization Modes Quick Erase, Full Erase (NIST SP 800-88r1), Secure Erase, and DoD Erase

Compatibilities
Compatible Devices 1.8"/2.5"/3.5” SATA HDDs and SSDs
Compatible Devices (with required adapter) 2.5", 3.5” IDE HDD, mSATA SSD, micro SATA, eSATA, iVDR
Supported Formats Quick Copy Function: FAT16/32/64, Windows (NTFS), Linux
(Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX).
Whole Device Copy Function: All Formats, including proprietary formats.
GPT, MBR, and Advanced Formats
Supported O/S All (Windows, Mac, Linux, and other stand-alone systems)

Hardware specification
Power Supply Universal Power: 115VAC or 230VAC, 50/60Hz
Working Temperature 5°C ~ 45°C (41°F ~ 113°F)
Storage Temperature -20°C ~85°C (-4°F ~ 185°F)
Working Humidity 20% ~ 80%
Storage Humidity 5% ~ 95%
Product Dimensions 9 in. x 7.5 in. x 3 in.
Weight (lbs) 3 lbs.
Certifications FCC, CE, REACH, ICES-003
Compliance NIST SP 800-88r1, ISO 27000

Title

Carry Series 1 to 2 SATA HDD/SSD Duplicator and Sanitizer
User Manual v A.04

Download Here