Browse Products
U-Reach Duplicators and Sanitizers
USB Duplicators and Sanitizers
Combo SD/MicroSD Duplicators and Sanitizers
CF/CFAST/CFExpress Duplicators and Sanitizers
IDE/SATA/SAS HDD/SSD Duplicators and Sanitizers
PCIe NVMe (M.2)/U.2 Duplicators and Sanitizers
SATA Interface Adapters and Cables
Flash Interface Adapters
Power Adapters and Others
Sockets and Modular Ports (Flash, HDD, & PCIe)
Data Destruction
SSD Shredder
HDD Destroyer
Data Destruction Accessories
Partner Brands
Digifast
HP
U-Reach Intelligent 9 CF Card Duplicator and Sanitizer
OVERVIEWS
Features
- High-speed copy supports up to 3.9GB/min (65MB/sec) per port
- Ergonomic design for easy operation.
- Quick socket swap module.
- Apply new advanced Multi-Core processor.
- Complete standalone system, no computer required.
- Supports all formats, data sizes, and memory card capacity bit-for-bit copy.
- DoD Erase function complies with USA Department of Defense (DoD) data security standard DoD 5220-22
- 4 kinds of professional quality diagnostic tools for Flash module.
- Capacity Check: Verifies the initial sector and the final sector of the connected flash device within 2 seconds.
- H3 Read Only Test: This function tests the readability of every sector on the connected USB device(s) and provides an average read speed. This test will not alter the data on the device(s).
- H5 Write/Read Test: Overwrites machine-generated values to all sectors in the NAND flash, and verifies them to determine quality. Once the test passes, the devices are then formatted into FAT.
- H6 Quality Test: Resembling the H5 test, it overwrites machine-generated values only to the empty sectors without disturbing pre-existing data, partitions, and formats.
- Quick data copy, copies only data contained areas.(Support FAT16/32, Linux ext2/ext3, NTFS)
- 2-second format, 3 models available for selection.
- Supports Synchronous and Asynchronous modes for the Copy/Compare/ Erase/ Format functions.
- Strict bit-by-bit hardware comparison further increases the reliability of duplication.
- User-friendly interface with real-time information LCD.
- Firmware upgrade available with well-experienced team support.
Additional Features In Gold Series Models:
- Event-log Reporting Function: Event Log Report is an important asset Management tool to assist users in monitoring and recording the whole duplication control process. The Event Log report records all details of each duplication task. For example, working time, run function, model number, serial number of media and results, etc.
- Burn-in Test Function: To find out the durability of your Flash devices, you can select the Burn-In function. You can set how long and how many loops and the duration of the Burn-In test. The range of the Burn-In time is between 30 minutes to 30 days.
- Dual Source Compare Mode (DSCM): Dual-source comparison mode can eliminate the chance of a duplication error caused by a worn or a source that is not 100% accurate. Use the first port as a copying source and use the second port as a backup/compare source. It will guarantee the highest reliability and 100% accuracy of the duplication process if your application demands it.
TECH SPECS
General
Source Targets | 1:3, 1:7, 1:15, 1:23, 1:39 |
Specification
Maximum Transfer Speed | 3.9GB/min. *Actual performance is dependent on device transfer speeds* |
Capacity | Supports the largest sized devices available on the market. |
Operating Type | Stand-alone, FPGA-based operation (Non PC-based) |
Supported Languages | English, Japanese |
LCD Display | Backlit Monochrome LCD Display |
LEDs | 3 LED Indicators per Port: Yellow (Power), Green (Pass), and Red (Fail) |
Control Panel | 4 Push Buttons(▲, ▼, OK, ESC) |
Features
Copy Modes | Quick Copy (System & Files): Supports Windows, Mac, and Linux. Whole Media: Copies bit-by-bit regardless of format and data type. |
Compare Function | Bit-by-bit data comparison |
Sanitization Modes | Quick Erase, Full Erase, DoD Erase |
Special Features
Log Report Management | Records all task details in the log report management system for enhanced production management. (Only for gold series) |
PC Monitoring | Real-Time status monitoring through PC (Exclude for 1:4 targets) |
Compatibilities
Compatible Devices | CF Type I/II, CF1.0, CF2.0, CF3.0, CF4.0, CF4.1, CF5.0, and CF6.0. CFAST(require additional adapter) |
Supported Formats | Quick Copy Function: FAT16/32/64, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX). Whole Device Copy Function: All Formats, including proprietary formats. GPT, MBR, and Advanced Formats |
Supported O/S | All (Windows, Mac, Linux, and other stand-alone systems) |
Hardware specification
Power Supply | Power Adapter Input: 100-240VAC / 47-63Hz / 1.4A Max. Power Adapter Output: 12VDC / 5A |
Working Temperature | 5°C ~ 45°C (41°F ~ 113°F) |
Storage Temperature | -20°C ~85°C (-4°F ~ 185°F) |
Working Humidity | 20% ~ 80% |
Storage Humidity | 5% ~ 95% |
Certifications | FCC, CE, REACH, MIL-STD-810H, DEF STAN 00-35, ICES-003 |
Compliance | NIST SP 800-88r1, ISO 27000 |
DISPLAY
USER MANUAL
Title |
Intelligent 9 Series CF/CFast Duplicator & Tester User Manual v A.03 |
Download | Here |