Browse Products
Duplicators and Sanitizers USB Duplicators and Sanitizers Combo SD/MicroSD Duplicators and Sanitizers CF/CFAST/CFExpress Duplicators and Sanitizers IDE/SATA/SAS HDD/SSD Duplicators and Sanitizers PCIe NVMe (M.2)/U.2 Duplicators and Sanitizers
Data Destruction SSD Shredder HDD Destroyer
Accessories SATA Interface Adapters and Cables Flash Interface Adapters Power Adapters and Others Sockets and Modular Ports (Flash, HDD, & PCIe)
Affiliated Brand M.2 NVMe SSD M.2 Product Peripherals

U-Reach USB3.1 USB Drive 1 to 3 Portable Copier

OVERVIEWS

Features

Read/Write speed inspection/Actual capacity inspection/ Bad sector inspection
Maximum copying speed of one single port can be up to 16GB/min (266 MB/sec).
In-built H2 and H5 Read/Write speed inspection, actual capacity inspection, and bad sector inspection
Supports bit-by-bit copy for all formats, including proprietary and unknown formats.
Compatible with USB 2.0/3.0/3.1.
Lightweight and portable design.

Impeccable High Speed
Highest speed USB Duplication /Inspection Equipment in the industry. Maximum copying speed of one single port can be up to 16GB/min.

Intelligent Copy Option

Systems and Files (Quick Copy Mode)

1. The duplicator automatically copies only the data area, rather than the empty spaces within the capacity, which reduces the duration of the copy process.

2. This copy mode supports the file formats such as Windows (FAT16/32/64/NTFS), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX). If the file system format to be copied is not among the supported formats above, then system will automatically switch to "whole media copy" mode.

Whole Media

1. The duplicator copies from the initial sector to the end, bit by bit.

2. There is no format limitation in this mode.

Quality Inspection

H2 Read/write speed inspection： In-built H2 read/write speed inspection test which is being widely used in the industry.

H5 Read/write speed inspection：the strictest quality inspection by writing into and reading the flash memory.

* Can set the area in the NAND flash to be inspected, read/write speed filtering, or bad sector inspection.

TECH SPECS

General

Model	USBA1
Target	3

Specification

Maximum Transfer Speed	16GB/min. Actual performance is dependent on device transfer speeds
Capacity	Supports the largest sized devices available on the market.
Operating Type	Stand-alone, FPGA-based operation (Non PC-based)
Supported Languages	English, Japanese
LCD Display	Backlit Monochrome LCD Display
LEDs	3 LED Indicators per Port: Yellow (Power), Green (Pass), and Red (Fail)
Control Panel	4 Push Buttons(▲, ▼, OK, ESC)

Features

Copy Modes	Quick Copy (System & Files): Supports Windows, Mac, and Linux. Whole Media: Copies bit-by-bit regardless of format and data type.
Compare Function	Bit-by-bit data comparison
Sanitization Modes	Quick Erase, Full Erase, DoD Erase

Compatibilities

Compatible Devices	USB1.1/2.0/3.0/3.1 devices and USB-HDDs
Compatible Devices (with required adapter)	eUSB (USB DOM) 2.54mm and 2.00mm
Supported Formats	Quick Copy Function: FAT16/32/64, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX). Whole Device Copy Function: All Formats, including proprietary formats. GPT, MBR, and Advanced Formats
Supported O/S	All (Windows, Mac, Linux, and other stand-alone systems)

Hardware specification

Power Supply	Power Adapter Output: 12V 5A Adapter
Working Temperature	5°C ~ 45°C (41°F ~ 113°F)
Storage Temperature	-20°C ~85°C (-4°F ~ 185°F)
Working Humidity	20% ~ 80%
Storage Humidity	5% ~ 95%
Product Dimensions	4.65 in. x 5.91 in. x 1 in.
Weight (lbs)	1.5 lbs.
Certifications	FCC, CE, REACH
Compliance	NIST SP 800-88r1, ISO 27000

USER MANUAL

Title	USB3.1 Carry Flash Duplicator & Tester (USB/USB-HDD) User Manual vA.03
Download	Here